|
The new Musical
Fidelity 550K Power Amplifier increases the power of any 50 watt
plus amplifier to over 550 watts rms. Most hi-fi
amplifiers do not have nearly enough power to deliver musical
realism. Until now the music lover either had to put up with
inaccurate musical reproduction or fork out huge amounts of money
for a physically massive amplifier to get that concert hall magic in
their living room.
The new Musical
Fidelity 550K Power Amplifier is a conceptual breakthrough and has
never been done before in hi-fi. The 550K Power Amplifier is
installed between the existing amplifier and loudspeakers. Nothing
else has to be changed or touched. It increases the power of the
existing amplifier from 50 watts to more than 550 watts which gives
any existing system sufficient power to give realistic concert hall
dynamics in the home.
The 550K Power
Amplifier gives a new lease of life to existing hi-fi systems and
allows the music lover to rediscover the passion and joy of music.
Installing the
550K Power Amplifier is a doddle. It fits between the existing
amplifier and the loudspeakers. After it has been connected to the
mains nothing else needs to be done as the 550K Power Amplifier has
a sophisticated turn on/turn off music sensing circuit. The audible
effect of using the Power Amplifier is dramatic and has to be heard
to be believed.
The 550K Power
Amplifier is housed in a modern sleek package with a small footprint
and can easily be positioned next to or behind the existing
loudspeaker.
Especificaciones:
|
Output |
|
Power |
550 WAtts per channel into 8 Ohms (27 dBW)
750 WAtts per channel into 4 Ohms |
|
Voltage, RMS |
66 Volts 20 Hz to 20 kHz |
|
Voltage, Peak-to-peak |
186 Volts |
|
Current peak-to-peak |
250 Amps |
|
Damping factor |
220 |
|
Output devices |
12 |
|
Thermal cut out (internal temp) |
70°C |
|
THD + noise, 20 Hz to 20 kHz |
<0.016% |
|
Signal / noise ratio |
> 120 dB 'A'-weighted |
|
Input sensitivity for 550 watts |
2.23V |
|
Input impedance |
50k Ohms |
|
Frequency response |
20 Hz to 30 kHz, +0, -0.2 dB |
|
Signal / noise ratio |
> 115 dB 'A'-weighted |
|
Input sensitivity for 550 Watts |
33V |
|
Input impedance |
50 Ohms |
|
Connections |
|
Line level inputs |
1line level RCA connector |
|
Speaker inputs |
1 pair 4 mm banana plug/binding posts |
|
Speaker outputs |
1 pair 4 mm banana plug/binding posts |
|
Power requirement |
100 / 115 / 230Volts AC 50 / 60 Hz (factory pre-set),
1000 Watts maximum into 8Ohms, 53 watts idle |
|
Weight: |
| |
12.1 kg, 26 1/3 lbs, unit only, unboxed |
| |
15 kg, 33lbs, in shipping carton |
|
Dimensions |
| |
215 mm, 8 1/2 inches diameter
404 mm, 16 inches high including feet
220 mm, 8 3/4 inches deep (front to back)
including terminals |
|
Standard accessories |
|
|
IEC type mains lead (10-Amp type)
Speaker lead |
|
... |
PRODUCTO
LIQUIDACIÓN |
PVP recomendado:
4.999 €
2.250
€
IVA incluido |
 |
Pulsar en la foto para
ampliar |
Pulsar en la foto para
ampliar |
Pulsar en la foto para
ampliar |
Pulsar en la foto para
ampliar |
Pulsar en la foto para
ampliar |
|
