|
|
|
Revel Concerta F12 + C12 + S12 |
|
Más información en
http://www.revelspeakers.com/ |
 |
|
|
OPCIONES |
|
+
200 € |
Soporte de
suelo
específico para canal
central (UNIDAD) |
|
|
|
ALTAVOZ DE 3 VÍAS TIPO
COLUMNA |
Whether the principal
loudspeakers in a stereo music system, or the main left and right
loudspeakers in a multichannel surround system, the Concerta F12
serves impeccably with Revel’s signature timbral accuracy and
astonishing dynamic range. The svelte cabinet occupies less than one
square foot of floor space, yet the F12 produces a broad and
expansive stage along with an explosive dynamic range with a four
driver, three-way design that incorporates Revel’s Organic Ceramic
Composite (OCC) diaphragm technologies.
Low frequencies, all the way down
to the lowest registers at an impressive 28 Hz (-10 dB), are
reproduced by a pair of die-cast frame OCC 8-inch cone woofers which
are equipped with high current voice coils, distortion-reducing
butyl rubber surrounds and flat high excursion spiders. The
essential midrange frequencies are reproduced by a 5¼-inch driver
featuring a die-cast frame and OCC cone to eliminate coloration from
resonances. For transparency and delicacy, the highest frequencies
emanate from the 1-inch OCC dome tweeter that is housed within the
CAI-optimized waveguide assembly, which provides both optimum
dispersion as well as increased dynamic range. This carefully
optimized dispersion precisely matches the 5¼-inch midrange,
resulting in unprecedented seamlessness and coherency. The tweeter’s
neodymium magnetic assembly features an under-hung coil which
ensures linearity and low distortion.
Internally, the F12’s thick
MDF cabinetry is substantially braced for additional rigidity, and
the steep slope, high order crossover features the industry’s
tightest 3% tolerance components for outstanding consistency and
matching with the design reference standard. The F12 is equipped
with bi-amp capability. All of the F12 drivers are magnetically
shielded to allow placement near a CRT video display. The F12 is
available in your choice of cherry or black cabinet finishes.
Especificaciones:
|
Sensibilidad |
90.5 dB con 2.83V @ 1
m (4 pi anecoico) |
|
Impedancia |
6
ohmios (nominal) |
|
Frecuencias de
corte |
3 vías, 3er orden @
575 Hz y 3,0 kHz |
|
Respuesta de
frecuencias en sala |
580 Hz a 18 kHz +/- 1 dB |
|
Extensión en
baja frecuencia |
-10 dB @ 28 Hz
-6 dB @ 40 Hz
-3 dB @ 52 Hz |
Dimensiones
(alto x ancho x fondo) |
1074 mm x 248 mm x 363 mm
(incluye patas y rejilla frontal) |
|
Peso |
28,4 kg cada caja sin
embalaje |

Pulsar en la foto para
ampliar |
|
... |

PRODUCTO
LIQUIDACIÓN |
PVP recomendado:
4.730 €
1.999
€ IVA incluido
(conjunto)
* QUEDAN 2 CONJUNTOS A
PRECIO REDUCIDO EN COLOR
NEGRO * |
 |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |

Pulsar en la foto para
ampliar |
Acabados:

Cerezo |

Negro |
|
|
ALTAVOZ CENTRAL DE 3
VÍAS |
|
OPCIONES |
|
+
200 € |
Soporte de
suelo
específico (UNIDAD) |
|
|
|
Quite possibly the most important
component of a multichannel surround sound speaker system, the
center speaker provides most if not all of a movie’s spoken dialog,
as well as music and sound effects, and is equally critical with
multichannel surround mixes as well. The Concerta C12 center
loudspeaker is designed to ensure that everything in the center
channel is audible and consistent over a wide listening area, with
exceptional dynamic range with no audible compression during high
volume passages.
Equipped with a quartet of sophisticated drivers with Organic
Ceramic Composite (OCC) diaphragms, the C12 features two 6½-inch die-cast
frame woofers with high power handling and extended low frequency
response all the way down to a remarkable 50Hz (-10dB). The critical
midrange frequencies are handled by a die-cast frame 4-inch driver
that is housed within its own sub-enclosure, while the high
frequencies are effortlessly reproduced by a 1-inch OCC dome tweeter
with a neodymium magnet that is housed within the Constant Acoustic
Impedance flared waveguide assembly for optimum dispersion,
efficiency and dynamic range. All drivers are magnetically shielded
for compatibility with CRT displays that can be affected by close-proximity
magnetic fields.
The steep slope, high order
crossover is equipped with ultra-tight 3% tolerance components to
ensure outstanding consistency and smooth tonal balance over the
entire frequency range. The C12 cabinet is constructed of thick MDF
with substantial internal bracing for added rigidity, and is
equipped with a rear-mounted adjustable tilt system that is ideal
for above-the-monitor placement.
An optional stand is available
for floor placement, which positions the C12 at the desired height
with a slight upward tilt for optimum coverage over the listening
area. The C12 is available in your choice of cherry or black cabinet
finishes
Especificaciones:
|
Sensibilidad |
90 dB con 2.83V @ 1 m
(4 pi anecoico) |
|
Impedancia |
8
ohmios (nominal) |
|
Frecuencias de
corte |
3 vías, alto orden @
500 Hz y 2,8 kHz |
|
Respuesta de
frecuencias en sala |
85 Hz a 15 kHz +/- 1,5 dB |
|
Extensión en
baja frecuencia |
-10 dB @ 50 Hz
-6 dB @ 60 Hz
-3 dB @ 72 Hz |
Dimensiones
(alto x ancho x fondo) |
232 mm x 530 mm x 258 mm
(incluye rejilla frontal) |
|
Peso |
14,5 kg sin
embalaje |

Pulsar en la foto para
ampliar |
|
|
ALTAVOZ
TRASERO DE 2 VÍAS |
|
A truly multi-faceted performer,
the Concerta S12 surround loudspeaker can be configured for
different dispersion characteristics according to the type of
surround effect desired as well as for different placements within
the listening room. Featuring a pair of woofers with Organic Ceramic
Composite (OCC) cones as well as a pair of OCC dome tweeters with
neodymium magnets along with our proprietary Constant Acoustic
Impedance technology, the S12 offers unparalleled surround sound
versatility. Three
dispersion modes are user-selectable via the front panel switch.
Choose Dipole mode for side-of-listening area placement, where the
two driver pair sets operate in reverse phase mode, which minimizes
localization while providing broad surround sound dispersion – ideal
for movie surround soundtracks. Bipole mode provides the best
combination of dispersion and improved localization for pinpoint
surround sound imaging with SACD, DVD-Audio, DTS® and Dolby Digital®
multichannel music surround sources. A third Monopole mode allows
the deactivation of one of the two driver sets, when spot-on imaging
is desired, such as for discrete multichannel pop music.
For 7.1 systems such as THX
Ultra2® Dolby Digital EX® and DTS ES®, the S12 also features dual
separated crossovers and two pairs of speaker input terminals. By
removing the shorting straps on the binding post pairs, one S12 can
function as two distinct surround loudspeakers in a single enclosure.
This unique capability allows the use of one S12 to function either
as both left and right rear surrounds, or as both a side and rear
surround speaker. The Concerta S12 can therefore provide a unique
solution for 7.1-channel systems in tight spaces.
The S12 is available in your
choice of black or white finishes, with matching grilles.
Especificaciones:
|
Sensibilidad |
87 dB con 2.83V @ 1 m
(4 pi anecoico) |
|
Impedancia |
8
ohmios (nominal) |
|
Frecuencias de
corte |
2 vías, alto orden @
2,5 kHz |
|
Respuesta de
frecuencias en sala |
72 Hz a 20 kHz +/- 1,5 dB |
|
Amplificación
recomendada |
20 - 120 W |
Dimensiones
(alto x ancho x fondo) |
299 mm x 337 mm x 178 mm
(incluye rejilla frontal) |
|
Peso |
5,57 kg sin
embalaje |

Pulsar en la foto para
ampliar |
|
|