Calle Colombia nº 22 (local izda), 28016 MADRID | Teléfonos: 913504965 - 913503130
HORARIO: Lunes a Viernes 10:30-14:00 y 17:00-20:00. Sábados 10:00-14:00
URL: http://www.studio-22.com | E-MAIL: studio22@studio-22.com
 
SOBRE LA TIENDA ALTA FIDELIDAD CINE EN CASA AUDIO PERSONAL ACÚSTICA
NOTICIAS MARCAS Y PRODUCTOS ALTAVOCES PULSAR AUDIO REPORTAJES DE FERIAS CÓMO CONTACTAR
NOVEDADES CATÁLOGO
CÓMO COMPRAR
DISPONIBILIDAD
GASTOS DE ENVÍO
FORMULARIOS DE PEDIDO

Hazte fan en Facebook

Síguenos en Twitter

Síguenos en Instagram

Datos studio-22.com

· Tamaño web:
49,8 GB
· Nº de subpáginas: 14.751
· Nº de imágenes: 113.081
· Nº de archivos PDF: 6.874

Portada > Cables de red eléctrica confeccionados > Audioquest > Audioquest Power Cable NRG-10 - 1,8 m
Audioquest Power Cable NRG-10 - 1,8 m
Más información en http://www.audioquest.com/
OPCIONES
+ 275 €/ m  CABLE SIN TERMINACIÓN (BOBINA 50M - 13.750)
CABLE DE RED DE PRESTACIONES HIGH-END DE 3 x 2,63 mm2 y 1,8 m

NRG-10

No matter how perfect an AC power source, distortion is added within any AC cable, especially within a stranded cable. Even the most sophisticated filters and power supplies cannot eliminate this cable-induced distortion.

SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS:

NRG-10 uses extremely high-purity Perfect-Surface Copper+ conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure PSC+ eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.

MULTI-POSITION CARBON-BASED NOISE-DISSIPATION and CROSS-TALK-DISSIPATION SYSTEMS (INSULATION):

The negative conductors in NRG-10 are insulated with partially conductive Carbon-Loaded Polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in “hash” and better dimensionality that comes whenever RF garbage is reduced in an audio circuit. Wild AC uses Foamed-Polyethylene Insulation on its positive conductors because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

RF NOISE STOPPERS:

Made from ferrite, the RF Noise Stoppers suppress and then dissipate (as low-level heat) high-frequency interference, eliminating layers of A/C grunge for a clear, quiet presentation.

COUNTER-SPIRAL GEOMETRY:

NRG-10 power cables have an inner circular array of positive conductors spiraling in one direction. Around this inner group are the negative conductors spiraling in the opposite direction. Even while the positive and negative conductors are crossing each other instead of being parallel, the relationship between the positive and negative groups is fixed and non-changing, adhering to one of AudioQuest’s most basic design tenets: consistency. The result is an astonishing clarity, like focusing a camera lens you had no idea was so far out of focus.

DIELECTRIC-BIAS SYSTEM (DBS, US Pat #s 7,126,055 & 7,872,195 B1):

All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.

COLD-WELD SYSTEM:

This novel plug design enables a perfect heat-free connection between cable and plug. The connection between the plug and conductors is made using AQ’s Cold-Weld System, which provides a superior connection that ensures that the structural integrity of the conductor is kept completely intact. The Cold-Weld System refers to a combination of high pressure at the point of contact and the use of copper- or silver-impregnated paste.

TERMINATIONS:

Cold-welded connectors

Especificaciones:

Longitud 1,8 m
Diámetro del cable 3 x 2,63 mm2 (2 x 13 AWG)
Tipo de conductor Tecnología de superficie perfecta de cobre de alta pureza (PSC+)
Aislamiento Sistema de polarización 72v DBS
Geometría Matriz circular interior Híper-trenzada con conductores en espiral
Sistema de disipación del ruido Sistema de disipación de ruido basado en la multiposición de carbono y reducción de diafonía
Obturador de ruido RF
Funda Funda exterior trenzada Negro/Marrón
Terminaciones Conector de corriente macho tipo Schuko a conector de corriente tipo IEC C-13 con soldadura en frío.
...

PRODUCTO
RECOMENDADO
PVP recomendado:
849 €
IVA incluido

Nuestro proveedor dispone de stock de este producto. Disponible en 24-48 horas


Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

 
Studio 22

   Calle Colombia nº 22 (local izda), 28016 MADRID | Teléfonos: 913504965 - 913503130
   HORARIO: Lunes a Viernes 10:30-14:00 y 17:00-20:00. Sábados 10:00-14:00
   URL: http://www.studio-22.com | E-MAIL:

 

 

Volver arriba