Calle Colombia nº 22 (local izda), 28016 MADRID | Teléfonos: 913504965 - 913503130
HORARIO: Lunes a Viernes 10:30-14:00 y 17:00-20:00. Sábados 10:00-14:00
URL: http://www.studio-22.com | E-MAIL: studio22@studio-22.com
 
SOBRE LA TIENDA ALTA FIDELIDAD CINE EN CASA AUDIO PERSONAL ACÚSTICA CÓMO CONTACTAR
NOTICIAS MARCAS Y PRODUCTOS ALTAVOCES PULSAR AUDIO REPORTAJES DE FERIAS ENCICLOPEDIA
NOVEDADES CATÁLOGO
CÓMO COMPRAR
DISPONIBILIDAD
GASTOS DE ENVÍO
FINANCIACIÓN
FORMULARIOS DE PEDIDO

Hazte fan en Facebook

Síguenos en Twitter

Síguenos en Instagram

Datos studio-22.com

· Tamaño web:
49,8 GB
· Nº de subpáginas: 14.751
· Nº de imágenes: 113.081
· Nº de archivos PDF: 6.874

Portada > Altavoces tipo monitor > Dynaudio > Dynaudio Contour 20
Dynaudio Contour 20
Más información en http://www.dynaudio.com/
OPCIONES
+ 450 € Acabados en NEGRO lacado brillo y BLANCO lacado brillo (PAREJA)
+ 700 € Acabados en GRIS y ROSEWOOD HIGH GLOSS (PAREJA)
ALTAVOZ DE 2 VÍAS TIPO MONITOR
Descarga del catálogo en .PDF
Descarga del manual en .PDF
Descarga de las especificaciones en .PDF

The Contour 20 standmounter takes everything we know about speaker technology – we’re Danes; we know a lot – and puts it in a compact, clean and great-sounding package.

Its sweet-toned Esotar2 soft-dome tweeter has been a legend in its own right for years. It’s commonly regarded as one of the world’s best-ever drivers – and because it’s been such a great friend to so many millions of ears (and a key part of Contours past), we just had to give it another outing.

The extended-excursion 18cm woofer, though, is brand new. It’s powered by a lightweight aluminium voice-coil and a vented dual-ferrite magnet system, and was created by driver specialists Danny Pasfall Christensen and Andreas Eberhardt Sørensen and their team under acoustic maestro Daniel Emonts. (They can hear the differences between different types of glue. We like those guys.)

It’s made from MSP – a material we developed ourselves, and have been using in our drivers since 1985. MSP gives exactly the right combination of stiffness and damping – which you’ll hear as exactly the right combination of power, finesse and control. Just what a Contour speaker should have. But we’ve taken it further: we’ve varied the diaphragm’s thickness across its surface, which gives even greater control over its sound.

Making a Contour without its signature baffle would be like making a car without wheels. Unthinkable. But there’s always room for improvement – and our designers love to stretch their legs (you should see the number of sketches they produced for just this part). This baffle is aluminium, and set into the cabinet. Its chamfer is included in the driver’s basket – which not only looks great, but also reduces unwanted high-frequency diffraction effects for clearer treble, and provides a solid foundation for the drivers to do their work. A solid foundation means improved high-volume performance at low frequencies, too (although your neighbours might not thank us for that).

And although we might have changed the cabinet’s shape (square is out; curves are in), the new design tips a respectful nod to older Contours. Look at it from the top; you’ll see the old baffle design in its shape. But it isn’t just for show – the new shape marries those aesthetics with cutting-edge acoustic physics. Its multi-layered construction is extremely well-damped, which means the Contour’s sound goes exactly where it’s supposed to: forwards.

We’ve redesigned the internal wiring and crossover, too. You won’t see what we’ve done, but you’ll hear the effect: amazingly clear sound, even off to the sides of the speakers. We love it.

 


Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar


Especificaciones:

Sensibilidad
(2,83V / 1 m)
86dB (2.83V / 1m)
Admisión de potencia medición IEC a largo plazo 180 W
Potencia recomendada 20 - 160W
Impedancia (nominal) 4 ohmios
Respuesta de frecuencia 39 Hz - 23 kHz (+/- 3 dB)
Woofer 18 cm cono MSP
Tweeter 28mm Esotar²
Principio de funcionamiento 2 vías bass reflex
Frecuencia de cruce 2.200 Hz
Tipo de crossover De segundo orden
Peso 15 kg (cada caja)
Dimensiones
(ancho x alto x fondo)
215 mm x 440 mm x 396 mm
Acabados Walnut, Roble Blanco, Gris, Rosewood high gloss, Negro y blanco lacado
...
PVP recomendado:
4.500 €
IVA incluido
(pareja)

 Nuestro proveedor dispone de stock de este producto. Disponible en 24-48 horas

 
Nuestro proveedor dispone de stock de este producto. Disponible en 24-48 horas

  Nuestro proveedor dispone de stock de este producto. Disponible en 24-48 horas

Satin White Lacquer  Nuestro proveedor dispone de stock de este producto. Disponible en 24-48 horas

  Nuestro proveedor dispone de stock de este producto. Disponible en 24-48 horas

Rosewood  Nuestro proveedor dispone de stock de este producto. Disponible en 24-48 horas
 


Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar
 
Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Acabados posibles:


Nogal

Roble blanco
   

Negro (Lacado brillante)
Satin White Lacquer
Blanco (Lacado brillante)
   

Gris
Rosewood
Rosewood

 
Studio 22

   Calle Colombia nº 22 (local izda), 28016 MADRID | Teléfonos: 913504965 - 913503130
   HORARIO: Lunes a Viernes 10:30-14:00 y 17:00-20:00. Sábados 10:00-14:00
   URL: http://www.studio-22.com | E-MAIL:

 

 

Volver arriba