Calle Colombia nº 22 (local izda), 28016 MADRID | Teléfonos: 913504965 - 913503130
HORARIO: Lunes a Viernes 10:30-14:00 y 17:00-20:00. Sábados 10:00-14:00

Hazte fan en Facebook

Síguenos en Twitter

Síguenos en Instagram


· Tamaño web:
49,8 GB
· Nº de subpáginas: 14.751
· Nº de imágenes: 113.081
· Nº de archivos PDF: 6.874

Portada > Etapas de potencia > Mark Levinson > Mark Levinson Nº 532
Mark Levinson Nº 532
Más información en
Descarga del catálogo en .PDF
Descarga del manual en .PDF

Simply put, the Nº532 is the best Mark Levinson dual-mono amplifier ever built. Featuring two 400-watt monaural power amplifiers housed in a single chassis, the Nº532 offers the distinctive sonic signature of earlier Mark Levinson dual-mono amplifiers, but with dramatically improved resolution and dynamics. This amplifier politely c ommands (and fully rewards) your complete attention.

Power amplification is a critical component in any high-performance home entertainment system, and its job is simple but nuanced: to be powerful and versatile enough to drive a wide range of demanding loudspeakers, yet be able to do so with the forcefulness and grace that high-quality sound reproduction requires. The N º532 exceeds all reasonable expectations, offering breathtaking sound quality and featuring two impressive 400-watt monaural power amplifiers housed in a single chassis.

The N º532’s meticulous craftsmanship is evident in the uniquely engineered design. To create the optimum power delivery system, the chassis of the N º532 is specially designed to isolate the audio circuits from interference and noise. When viewed from above, the rear portion of the power amplifier has three distinct piers. Control and power circuitry reside in the center pier, separate from the audio circuitry, which resides in the two outer piers – one dedicated to each channel. The power transformers are located at the front of the chassis, away from the audio circuits. This unusual design provides a number of important advantages – isolation of the potentially noisy power and control circuits from the delicate audio circuits, additional heat sink surface area for cooling, and very short signal and power delivery paths.

Additionally, special care was taken in the design and implementation of the voltage regulator circuitry. Multiple stages of regulator circuits are employed, using a combination of series and shunt elements, custom-tailored to the audio circuitry for which they provide power. These discrete, low-noise, wide-bandwidth circuits are in close proximity to the audio signal path that they power, but placed on a separate circuit board to minimize interaction with the audio signals and prevent the corruption of low-level signals. The result is higher resolution, better bass definition, greater focus and more precise control of dynamics. Similarly extraordinary measures were taken with the design of the toroidal power transformers, which filter mains-born noise from the secondary power supply and help ensure that any capacitance that normally exists between the windings is knocked down to prevent it from finding its way into the delicate audio circuits. The power supplies are placed very close together to maximize magnetic field cancellation, and as far away from the audio signal path as possible to further reduce the potential for interference.

The compact design of the N º532’s circuitry allows the signal path to be tighter and shorter, reducing parasitic capacitances and minimizing propagation delay and phase shift. The end result is a faster, wider bandwidth, cleaner output signal with very low impedance level and minimal signal degradation. Lastly, the audio signal output path contains 24 output devices per channel, providing an impressive power capability while minimizing crossover distortion.

The first non-Reference Mark Levinson amplifier to be fully differential, the N º532 provides both RCA and XLR connectors that accept balanced signals directly into the input stage of the amplifier, with no additional circuitry. Also, it is the first Mark Levinson linear amplifier to incorporate through-hole parts specifically for critical signal path components and surface mount components for building smaller circuits with higher performance. With the recent evolution of semiconductors, it is now possible to build more compact circuits, in turn obtaining better transient response with greater stability and enhance i mmunity from noise sources.

As music and cinema systems continue to grow more complex, integrating individual components takes on greater importance. To address the increasing demand for more control and c ommunications capabilities, the N º532 features Mark Levinson’s proprietary ML Net and Link2 inter-device c ommunication protocols, allowing the N º532 to be easily integrated and controlled by other Mark Levinson devices. The N º532 also provides a traditional 12V trigger input and output to synchronize on/standby status with other devices that do not include ML Net or Link2. An RS-232 port also allows the N º532 to be controlled by units from industry leaders such as AMX™, Crestron® and other third party integrated control systems.


Control Connectors Two Link2 ports
One Ethernet port
One 3.5 mm mono (tip/sleeve) mini plug trigger input, 3V-12V DC
One 3.5 mm mono (tip/sleeve) mini plug trigger output, 3V-12V DC
3-Pin IEC standard power connector
Dimensions Height (with feet): 9-9/16" (243 mm)
Height (without feet): 8-¾" (222 mm)
Width: 17-½" (445 mm)
Depth: 21-1/18" (536 mm)
Frequency Response Within 0.1 dB from 10 Hz to 20 kHz
Input and Output Connectors Two balanced XLR inputs
Two unbalanced RCA inputs
Two “Hurricane” loudspeaker outputs with banana-plug sockets (banana-plug sockets not available on the 230V AC models)
Input Impedance 100 kΩ (balanced), 50 kΩ (unbalanced)
Operating Environment Operating temperature: 0° to 35°C (32° to 95°F)
Storage temperature: -30° to 75°C (-22° to 167°F)
Relative humidity: 95% maximum without condensation
Output Impedance <20 m&Omega, 20 Hz to 20 kHz
Power Requirements 100V~, 120V~, 230V~, 800W, factory set for destination country
Rated Output Power 20 Hz to 20 kHz at <0.5% THD, 400W per channel at 8Ω, full output from 2.59Vrms
Signal-to-Noise Ratio <85 dB, reference level: 2.83Vrms
Weight Net weight: 121.5 lb (55.2 kg)
Shipping weight: 129.5 lb (58.8 kg)
PVP recomendado:
30.250 €
IVA incluido


Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Pulsar en la foto para ampliar

Studio 22

   Calle Colombia nº 22 (local izda), 28016 MADRID | Teléfonos: 913504965 - 913503130
   HORARIO: Lunes a Viernes 10:30-14:00 y 17:00-20:00. Sábados 10:00-14:00
   URL: | E-MAIL:



Volver arriba